Product Description
Disperse printing thickener RG-7207A
Disperse printing thickener RG-7207A is a new generation of highly effective synthetic thickener. The thickener is widely used in disperse dye printing, and has certain advantages in direct printing, the printing effect is better than similar products, can replace sodium alginate. The indexes of color amount and brightness are better than other similar products. Replacing sodium alginate with thickener RG-7207A will bring significant economic and social benefits to printing and dyeing manufacturers.
Ingredient:
Synthetic high polymer
Physical and chemical index:
Appearance: milky white or yellowish brown viscous substance
Ionic: Anionic
P H: 6.5-7.5
Solid content: > 42%
Odour: slightly kerosene smell
Properties and Usage:
High adhesion to water molecules, good thickening effect. Because of its anionic, conducive to the dye on the fiber dyeing, the amount of color high, stable color paste, even in summer, transferred into the color paste storage is not easy to deteriorate. It is an ideal substitute for sodium alginate thickener.
Main advantages:
1. Significant economic benefits, about 1/3 cost reduction for disperse dye printing. This product is the most superior product in performance and price, whether compared with natural paste or similar products at home and abroad.
2. High color yield. It does not affect the dye color, the color is more bright, printing paste viscosity range is wide, suitable for different fabric thickness, fine rough different patterns, large area uniform dyeing good.
3. Convenient modulation. According to the proportion of the amount of water, high-speed stirring, just a few minutes can thicken, and according to the viscosity of the paste can be adjusted. After modulation, the color paste is stable and stored in a covered container for 15 days without layering or thinning.
4. Soft touch. The original printing process is not affected, no mesh, no seepage, feel softer.
5. No need to use with other thickening agents.
Application method:
1. Prepare paste in advance
Mix with water into 3% ~ 5% basic paste (white paste) for reserve. The method is to gradually add quantitative rg-7207a into the water containing 1/3 of the container capacity, mix at high speed, and then gradually add water to the required consistency.
Dissolve the dye and other additives with a little water, then add the white paste prepared with this product in advance, mix and filter evenly, then use.
2. Direct use:
Dissolve the dye and other auxiliaries evenly with appropriate amount of water, then add the product, make slurry with a blender, and filter it for use.
Packing:
160KG/Drum, 18.56MT/20`FCL
It can be stored for two years in 5 ~ 40 ºC.
Audited Supplier 
){kind=link}
){kind=link}