DISPERSE DYE PRINTING THICKENER RG-705200
Disperse dye printing thickener RG705200 is a new generation of high efficiency synthetic thickener which was researched and developed by our company. This thickener was widely used in disperse dye printing. It also has a certain advantage in direct printing. Its printing result achieved and better than similar products, can replace sodium alginate. It was easy operation and safety when using.
If use thickener RG - 705200 replace sodium alginate, will make printing factory obtain remarkable economic and social benefits.
Major ingredient:
Synthetic high polymer
Physical and chemical index:
Appearance: light yellow sticky liquid
Ionicity: Anion
P H Value: 6.5-7.5
Solid content: 40% min
Properties and Uses:
This product has a high cohesive force on water molecule, the thickening
effect is good. Because of its anion, can help disperse dyes to fiber dyeing,
high dying ability. Paste is stability, even in Summer, paste preparation is also
non-perishable storage, is an ideal alternative thickener to sodium alginate.
Major Advantage:
1. The economic benefits is remarkable, when used for disperse print, if
instead of 1 ton of sodium alginate or imported similar products, while this
product only need 0.8~1 ton, cost delined about 1/3. Whatever
compared with the natural paste or the simlilar products in domestic and
abroad, this product is the most excellent and cost performance product.
2. Dyeing ability is high.Don't affect the dyes chromophore, color seems more bright. Printing viscosity has a wide range, suitable for different thickeness fabric, fine or rough different patterns, Good levelness on large area dyeing.
3. Convenient paste preparation. Proportional amount to the water, stired with high speed, just a few minutes for thickening, and can be adjustable according to paste viscosity freely. Prepared paste is stability, and stored in a covered container for 15 days will not layered and diluted.
4.Feels soft. Not affect the former printing process,non-clogging of screen, non- infiltration.
5.No need to use with other thickeners any more.
Application:
1. Can be prepared into paste of 3~5 by water. The method is gradually add
quantitative RG705200 to contained water of 1/3 volume of the container, then stir with high speed, then gradually add water to the required stickiness. Or can stir the preparation paste with high speed, then gradually add RG-705200 to the required stickiness.
2. Firstly dissolve the dye into right amount of water evenly, and add enough water according to ratio, then add RG-705RA gradually under high speed stirring, until reach to the required viscosity, use it after filtering.
3. Reference Formulation:
Disperse Dye 0.5~6.0
RG-705200 2.0~6.0
Water X
Total 100
Package and Storage:
160kg/Drum, 18.56MT/20`FCL
It can be stored for 2 years under the temperature of -5~40ºC.
Disperse Dye Printing Thickener RG-705200 compared with Sodium Alginate
1. Liquid product easily to use, and can be used for adjusting the printing paste viscosity at any time of later thickening.
2. Fast of hickening speed, can be prepared and applied at any time.
3. Stability of printing paste, no mouldiness, no hydrolytic, reduce waste, redue pollution.
4. No impurities, reduced the printing flaws made by sediment of algae such as dragging the cutter, clogging screen etc
5. Printing viscosity has a wide range, suitable for different thickeness fabric, fine or rough different patterns.
6. Excellent ability on through screen,helping to improve the machine speed.
7. Improving the color yield (10-40%), saving dyes.
8. Don't affect dye chromophore, the printing color is more bright than sodium alginate.
9. Good levelness on large area dyeing.
10.Stability of product quality, in favour of production controlling.